OnePlus Nord 2 5G (DN2101) is completely dead, stuck in boot loop, or facing UFS corruption, this tested UFS dump file will help restore your device. The file is read using Easy JTAG Box and is compatible with UFI Box, MIPI Tester, and other UFS flashing tools.
📌 File Details
✔ Device: OnePlus Nord 2 5G
✔ Model: DN2101
✔ Chipset: MediaTek Dimensity 1200
✔ Storage Type: UFS
✔ File Type: Full Dump File (Boot Repair & Partition Backup)
✔ Uses: Dead Boot Repair, UFS Restoration, Partition Recovery
✔ Read By: Easy JTAG Box
✔ Supported Tools: Easy JTAG, UFI Box, MIPI Tester
🛠 Issues Fixed with This Dump File
✅ Dead Boot Repair
✅ Boot Loop / Stuck on Logo Fix
✅ Corrupted UFS Storage Repair
✅ Fix Partition Errors & Missing Partitions
✅ Restores Boot, System, Vendor & Other Key Partitions
📥 How to Use OnePlus Nord 2 5G Dump File?
Requirements:
🔹 Windows PC with UFS Flasher
🔹 Easy JTAG Box, UFI Box, or MIPI Tester
🔹 OnePlus Nord 2 UFS Chip (Desoldered if Needed)
🔹 Correct UFS IC Adapter
Flashing Instructions:
1️⃣ Backup Security Files
- If possible, back up security partitions before flashing to prevent IMEI loss.
2️⃣ Remove UFS Chip (if necessary)
- If the device is completely dead, remove the UFS chip using a hot air station.
3️⃣ Connect UFS Chip to Easy JTAG/UFI Box
- Place the UFS chip in the UFS adapter and connect it to Easy JTAG, UFI Box, or MIPI Tester.
4️⃣ Load the Dump File
- Select the correct UFS IC model and load all required partitions (Boot, System, Vendor, etc.).
5️⃣ Write Dump File to UFS Chip
- Flash the dump file carefully and verify partitions after writing.
6️⃣ Reinstall the UFS Chip
- Carefully resolder the UFS chip back onto the motherboard.
7️⃣ Power On & Test
- Boot the device and flash stock firmware if necessary.
⚠ Note: If the security partition was erased, IMEI repair is required separately.
❓ FAQs (Frequently Asked Questions)
1. What is this dump file used for?
This UFS dump file is used for dead boot repair, fixing boot loops, and restoring corrupt partitions in OnePlus Nord 2 5G DN2101.
2. Can I flash this file using QFIL or SP Flash Tool?
No, this is a UFS dump file, not a firmware package. It must be flashed using Easy JTAG, UFI Box, or MIPI Tester.
3. Does this file fix IMEI issues?
IMEI can only be restored if you backed up security partitions before flashing. Otherwise, manual IMEI repair is required.
4. Will flashing this dump file erase my data?
Yes, flashing will erase all data. Make sure to back up important files before proceeding.