Infinix X626B (Infinix S4) Dump File with Scatter – Dead Boot Repair Solution

Is your Infinix S4 (X626B) completely dead, not charging, or stuck in a boot loop? You're likely dealing with a corrupted firmware or damaged EMMC partitions. In such cases, using a Dump File with Scatter File can help you fully restore the device and recover it from a dead or bricked condition.

We are sharing a tested and working Infinix X626B Dump File, which includes a full partition dump and the MTK scatter file, essential for repairing the phone using Easy-JTAG, UFI Box, or SP Flash Tool (for partial flashes).

📦 File Contents:

• Complete dump of all essential partitions:

  • preloader

  • lk / boot / recovery

  • vbmeta

  • system, vendor, cache, userdata

  • nvram, nvdata, md1img

• Includes MTK Scatter File (required for SP Flash Tool)

• File format: .bin files with .txt scatter

🛠️ When to Use:

• Phone is dead, not turning on or stuck in MTK USB Port / Brom mode

• After a failed OTA or wrong flash attempt

• Device stuck at boot logo or fastboot mode

• IMEI or network not detected after firmware issue

• EMMC/UFS corruption repair

🔧 How to Flash:

Using Easy-JTAG or UFI Box:

1. Connect via ISP pinout or socket.

2. Backup your original security partitions (especially nvram/nvdata).

3. Load and flash the respective .bin dump files.

4. Power on and verify if the device boots.

5. Optionally flash stock firmware for system stability.

Using SP Flash Tool:

1. Load the provided scatter file.

2. Select necessary partitions (avoid preloader if unsure).

3. Connect the phone in brom mode (volume down + USB).

4. Click Download to start flashing.

⚠️ Note: Always backup IMEI/NV partitions before flashing. Flashing without preserving these may cause no IMEI / no network issues.

📥 Download Link:

👉 Infinix X626B (Infinix S4) Dump File with Scatter – Download Now

This dump file is ideal for technicians and service centers who deal with hard-bricked Infinix S4 devices. Make sure you have experience with professional flashing tools before using this file.

If you have any questions or need the ISP pinout, drop a message in the forum or join our repair community!