Oppo Reno 5 Pro (CPH2201) is suffering from dead boot, boot loop, or corrupted UFS storage, this tested UFS dump file will help you restore it. This file is read using Easy JTAG Box and is fully compatible with UFI Box, MIPI Tester, and other UFS flashing tools.
📌 File Details
✔ Device: Oppo Reno 5 Pro
✔ Model: CPH2201
✔ Chipset: MediaTek Dimensity 1000+
✔ Storage Type: UFS
✔ File Type: Full Dump File (Boot Repair & Partition Backup)
✔ Uses: Dead Boot Repair, UFS Restoration, Partition Recovery
✔ Read By: Easy JTAG Box
✔ Supported Tools: Easy JTAG, UFI Box, MIPI Tester
🛠 What Issues Does This Dump File Fix?
✅ Dead Boot Repair
✅ Boot Loop / Stuck on Logo Fix
✅ Corrupted UFS Storage Repair
✅ Fix Partition Errors & Missing Partitions
✅ Restores Boot, System, Vendor & Other Key Partitions
📥 How to Use Oppo Reno 5 Pro Dump File?
Requirements:
🔹 Windows PC with UFS Flasher
🔹 Easy JTAG Box, UFI Box, or MIPI Tester
🔹 Oppo Reno 5 Pro UFS Chip (Desoldered if Needed)
🔹 Correct UFS IC Adapter
Flashing Instructions:
1️⃣ Backup Important Data
- If the phone is still partially functional, take a backup of security files to avoid IMEI loss.
2️⃣ Remove UFS Chip (if necessary)
- If the device is completely dead, desolder the UFS chip using a hot air station.
3️⃣ Connect UFS Chip to Easy JTAG/UFI Box
- Place the UFS chip in the UFS adapter and connect it to Easy JTAG, UFI Box, or MIPI Tester.
4️⃣ Load the Dump File
- Select the correct UFS IC model and load the boot, system, vendor, and required partitions.
5️⃣ Write Dump File to UFS Chip
- Flash the dump file carefully and verify each partition.
6️⃣ Reinstall the UFS Chip
- Carefully resolder the UFS chip back onto the motherboard.
7️⃣ Power On & Test
- Boot the device and flash stock firmware if necessary.
⚠ Note: IMEI must be restored separately if security partitions were erased.
❓ Frequently Asked Questions (FAQs)
1. What is this dump file used for?
This UFS dump file is used for dead boot repair, fixing stuck on logo issues, and restoring corrupt partitions in Oppo Reno 5 Pro CPH2201.
2. Can I flash this file using QFIL or SP Flash Tool?
No, this is a UFS dump file, not a firmware package. It must be flashed using Easy JTAG, UFI Box, or MIPI Tester.
3. Does this file fix IMEI issues?
IMEI can only be restored if you backed up security partitions before flashing. Otherwise, manual IMEI repair is required.
4. Will flashing this dump file erase my data?
Yes, flashing will erase all data. Make sure to back up important files before proceeding.