Tecno Camon 30 CL6 is completely dead and not responding to charging, booting, or flashing through SP Flash Tool, then you're likely facing a dead boot issue. In such cases, using a full dump file via Easy-JTAG Box can help restore your device and bring it back to life.
This tested and working dump file was taken from a functional Tecno Camon 30 CL6 unit and can be used to repair emmc/ufs storage directly.
🔧 What Is This Dump File?
This is a full Easy-JTAG compatible dump file that contains all necessary partitions like:
-
preloader
-
lk / lk2
-
boot / recovery
-
vbmeta / system / vendor
-
userdata
-
md1img / nvram / nvdata, etc.
By flashing this full dump using the Easy-JTAG box, you can restore your phone's internal storage with clean, working partition images — ideal for fixing no boot, Qualcomm 9008 mode, or blank screen issues.
🛠️ How to Use:
-
Disassemble the Tecno Camon 30 CL6 and identify the EMMC or UFS pinout (if not available online, use multimeter or Easy-JTAG’s pinout detection features).
-
Connect the phone to Easy-JTAG Box or UFI Box via ISP (In-System Programming) or socket adapter.
-
Backup existing partitions if readable — especially nvdata, nvram, persist, and sec_efs (these contain IMEI and device-specific configs).
-
Load the CL6 Dump File in Easy-JTAG software and write it to the respective memory chip.
-
After successful flashing, reassemble and power on your device.
-
Optionally, flash the official firmware again via SP Flash Tool or SWD after restoring the dump.
⚠️ Warning:
Always backup your original IMEI/security partitions before flashing. If you skip this step, your IMEI might be lost permanently and result in no network/no baseband issues.
📥 Download Link
👉 Tecno Camon 30 CL6 Dump File – Easy-JTAG
This dump is helpful for mobile repair technicians dealing with hard-bricked Tecno CL6 phones. If you’re facing any issues during the process, feel free to reach out on our Tech Fix Forum or join our social media support groups.
Let us know your experience in the comments!