Notifications
Clear all

Realme Narzo 60 Pro 5G (RMX3771) UFS Dump File – Dead Boot Repair

1 Posts
1 Users
0 Reactions
230 Views
Posts: 224
Admin
Topic starter
(@admin)
Member
Joined: 10 months ago

Realme Narzo 60 Pro 5G (RMX3771) is facing dead boot, boot loop, or partition issues, this 100% tested UFS dump file can help restore your device. The file has been read by Easy JTAG Box and is compatible with UFI Box, MIPI Tester, and other UFS flashing tools.


📌 File Details

Device: Realme Narzo 60 Pro 5G
Model: RMX3771
Chipset: MediaTek Dimensity 1200
Storage Type: UFS
File Type: Full Dump File (Boot Repair & Partition Backup)
Uses: Dead Boot Repair, UFS Restoration, Partition Recovery
Read By: Easy JTAG Box
Supported Tools: Easy JTAG, UFI Box, MIPI Tester


 

🛠 Issues Fixed with This Dump File

Dead Boot Repair
Fix Boot Loop / Stuck on Logo
Corrupted UFS Storage Repair
Fix Missing Partitions & Errors
Restore Boot, System, Vendor & Other Key Partitions


📥 How to Use Realme Narzo 60 Pro 5G UFS Dump File?

Requirements:

🔹 Windows PC with UFS Flasher
🔹 Easy JTAG Box, UFI Box, or MIPI Tester
🔹 Realme Narzo 60 Pro 5G UFS Chip (Desoldered if Needed)
🔹 Correct UFS IC Adapter

Flashing Instructions:

1️⃣ Backup Security Files

  • Always back up security partitions before flashing to avoid losing IMEI and other critical data.

2️⃣ Remove UFS Chip (if necessary)

  • If the device is completely dead, remove the UFS chip using a hot air station.

3️⃣ Connect UFS Chip to Easy JTAG/UFI Box

  • Insert the UFS chip in the UFS adapter and connect it to Easy JTAG, UFI Box, or MIPI Tester.

4️⃣ Load the Dump File

  • Select the correct UFS IC model and load all required partitions (Boot, System, Vendor, etc.).

5️⃣ Write Dump File to UFS Chip

  • Carefully flash the dump file and verify partitions after writing.

6️⃣ Reinstall the UFS Chip

  • Resolder the UFS chip back onto the motherboard.

7️⃣ Power On & Test

  • Boot the device and flash official firmware if necessary.

Note: If the security partition was erased, IMEI repair is required separately.


❓ FAQs (Frequently Asked Questions)

1. What is this dump file used for?

This UFS dump file is used for dead boot repair, fixing boot loops, and restoring corrupt partitions in Realme Narzo 60 Pro 5G (RMX3771).

2. Can I flash this file using QFIL or SP Flash Tool?

No, this is a UFS dump file, not a firmware package. It must be flashed using Easy JTAG, UFI Box, or MIPI Tester.

3. Does this file fix IMEI issues?

IMEI can only be restored if you backed up security partitions before flashing. Otherwise, manual IMEI repair is required.

4. Will flashing this dump file erase my data?

Yes, flashing will erase all data. Ensure you back up important files before proceeding.


📥 Download Realme Narzo 60 Pro 5G (RMX3771) UFS Dump File

📌 [Login or Register to view this link]

Topic Tags
Share: