If your Realme 10T 5G (RMX3612) is dead, stuck at boot logo, or bricked, this 100% tested dump file will help you repair, restore, and fix your device.
This dump file is read via UnlockTool and supports flashing using Easy JTAG, UFI Box, and Medusa Pro for dead boot recovery and EMMC/UFS repair.
🔧 File Details & Specifications
| Parameter | Details |
|---|---|
| 📱 Device | Realme 10T 5G (RMX3612) |
| 🔥 Chipset | MediaTek Dimensity 810 |
| 💾 Storage Type | UFS |
| 📂 File Type | Full Dump File |
| 🛠 Repair Type | Dead Boot Repair, UFS Restoration, Unbrick |
| 🛠 Supported Tools | UnlockTool, Easy JTAG, UFI Box, Medusa Pro |
🚀 Why Do You Need This Dump File?
If you are facing any of these common issues, flashing this UFS dump file can fix them:
✅ Fix Dead Boot Issue – If your phone is completely dead, this file can revive it.
✅ Solve Stuck Boot Logo – Repair devices that are frozen on the Realme boot screen.
✅ Unbrick Your Phone – Recover from a bricked device due to wrong firmware flashing.
✅ Restore UFS Storage – Fix corrupted UFS storage and restore partitions.
✅ Enable Firmware Flashing – After fixing the UFS, you can flash stock firmware for optimal performance.
🔧 How to Flash Realme 10T 5G Dump File?
To flash the dump file, follow these steps carefully:
Step 1: Backup Security Data
📌 Before flashing, take a backup of security data (if possible). Flashing will erase all existing data.
Step 2: Use a Professional Flashing Tool
📌 Open UnlockTool, Easy JTAG, or UFI Box and select the correct device model.
Step 3: Load the Dump File
📌 Load the Realme 10T 5G dump file in the tool and select the proper UFS partition.
Step 4: Start the Flashing Process
📌 Click "Write" to flash the dump file onto the UFS storage. Wait until the process is complete.
Step 5: Verify & Install Firmware
📌 Once flashing is done, check if the device boots properly. If needed, flash the official stock firmware.
🔥 Best Tools for Mobile Repair & UFS Flashing
To get best results, use the following tools:
🔹 UnlockTool (Official Site)
🔹 Easy JTAG Box Software Free Download
🔹 Best UFI Box Firmware Repair Guide
🔹 How to Fix Bricked Android Phone
🔹 Advanced Mobile Repairing Solutions
🎯 Frequently Asked Questions (FAQs)
Q1: What is a UFS dump file?
📌 A UFS dump file is a backup of internal storage (UFS), including the bootloader, partitions, and system files.
Q2: Is this dump file tested?
📌 Yes, the Realme 10T 5G dump file has been 100% tested using UnlockTool for successful flashing.
Q3: Can I use this file on other Realme models?
📌 No, this file is only for Realme 10T 5G (RMX3612) and should not be used on other devices.
Q4: What if my phone is still dead after flashing?
📌 If the issue persists, try another UFS dump file or check for hardware faults.