If your MOTO G73 XT2237-2 is completely dead, stuck in Preloader mode, or showing no signs of life due to a corrupted bootloader or failed firmware flash, this 100% tested UFS Dump File will help restore your device. The file was extracted using Easy-JTAG and is ideal for
professionals needing a full partition restore via UFS ISP or socket method.
📱 Device Specifications:
-
Model Name: MOTO G73
-
Model Code: XT2237-2
-
CPU / Chipset: MediaTek Dimensity 930 (6nm)
-
CPU Type: Octa-core (2x2.2 GHz Cortex-A78 & 6x2.0 GHz Cortex-A55)
-
GPU: IMG BXM-8-256
-
Storage Type: UFS 2.2
-
Boot Mode for Flashing: Preloader Mode / BROM Mode (MediaTek)
-
Supported Tools: Easy-JTAG Plus, UFI Box (UFS supported)
🛠️ When Should You Use This Dump File?
-
Device not booting at all, black screen.
-
Stuck in Preloader mode and not detected in SP Flash Tool.
-
Flashing wrong firmware or power failure during update caused a brick.
-
Need to restore missing or corrupted critical partitions like
boot,recovery,vbmeta,super, etc. -
Professional board-level technicians needing ISP-based UFS repair.
⚠️ Important Note Before Flashing:
⚠️ Backup your original IMEI and security partitions (
nvram,nvdata,protect1,protect2) if accessible.
Flashing a full dump without these backups may result in IMEI loss, No Network, or Baseband Unknown issues.
✅ Flashing Instructions:
-
Disassemble the phone and locate the UFS ISP pinout (if not using socket adapter).
-
Connect the device to Easy-JTAG, UFI Box, or other UFS programmers.
-
Load and write the required dump partitions or perform a full restore.
-
After writing, reflash the official stock firmware via SP Flash Tool if needed.
-
Test the device for boot and connectivity.
📥 Download Link:
🔗 MOTO G73 (XT2237-2) UFS Dump File – Free Download (TechFixForum)
This UFS Dump is provided for educational and professional use only. If you need help with the UFS pinout or flashing process, visit the community forum at TechFixForum.com